Hantek CC-65 Current Clamp Probe – Part 1 – Probe Analysis and Discussion

This post will discuss the Hantek CC-65 current clamp probe, a cheap and useful tool. I’ve ordered this probe because thanks to its low cost, and reasonable performance. I was happy to see there’s even a schematic for it available online as drawn in a post on the EEVblog forum. Looking at the schematic made it clear there’s a lot that can be done to improve it fairly easily. Due to the length of the post, and the fact I’m still waiting for the parts to arrive, I’m going to split this post into a few parts. In this part we’ll go over the operation of the probe and its schematic, and then discuss possible modification that can be made to it. There are quite a few tradeoff to be made in the selection of parts and which mods to do, based on the requirements out of the probe. I will detail some of these considerations, and in the next parts will present results based on the mods I’ve decided to implement according to my preferences.
This part turned out to be quite long with a lot of text and little pictures/results. I think this is of value and will serve as good background and reference in the next parts of this series where measurement data will be presented. There, it will be possible to simply point to the relevant part of the current post, to explain the reasoning behind chosen components for mods, and measurement results explanations.

Continue reading “Hantek CC-65 Current Clamp Probe – Part 1 – Probe Analysis and Discussion”