This is part of 2 this series of posts about room acoustics improvement for my listening room. In part 1, I’ve provided the background about the room structure, different issues I was having, and how I was planning on tacking them while keeping the room relatively “normal”. In this, part 2, I will go into more details about the modifications I’ve made to the room, with some details about building the treatment, and materials that were used, along with some measurements to keep things more clear and provide some tangible data as to what were the differences achieved. This might be useful to others considering what sort of change they can expect from similar modifications. Continue reading “Dealing with Listening Room Acoustics – DIY – Part 2 – Getting to Work”
Its been a long (loooooong) time since my last blog post, mostly due to lack of time for any “after hours” projects. Finally, I have something new I’d like to post on the blog. Unlike most previous projects, this isn’t electronics related, but it is Audio/DIY/Measurements related. So hopefully, you will find this post interesting, and perhaps even useful.
A while ago, I’ve moved into a new place, and finally had a space I could use for a stereo/home-theater. This was the main use of the new space I’ve had, which meant I had much more freedom in the setup and room organization than I’ve ever had in the past. One thing that was clear from the get go is that this room has noticeable acoustics problems, as will be detailed later, and therefore it had to be treated to some extent. In this post I’d like to go into some detail about the steps I took, so far, to deal with these acoustic issue. What I chose as my targets, what I chose to deal with passively/actively, how I built the panels I’ve used, etc.
Due to the length of this write-up, I’ll split this into 2 parts, with this post being the first. The first part will include mostly introduction to the topic, as well as introducing the room structure, and initial measurements with no treatment. In the next, second part, I will detail step by step, the different modifications and their effect on the measurements.